FIBERGLASS MESH
SEALANTS & COATINGS TECHNOLOGIES, INC.
Fiberglass Mesh
A fiberglass mesh is used in the base/top coat of the Palladium® process during substrate preparation when applying the SCT Palladium® System to approved substrates. This fabric is an open weave fiberglass mesh with a contact adhesive on one side. The fabric weight is 4 ounces per square yard or 135 grams per square meter.

For applications where impact protection is required, a higher impact resistant fabric is also available that is 14 ounces per square yard (473 grams per square meter).  Please contact us for further information about this product.


Other Information
Adhesive
SCT Flexible Joint Compound
Cementitious Base Coat
Thin-set cement base coat, using SCT Sealing Primer instead of water, used to float out planar irregularities, fill major cracks and voids, and/or to add additional impact resistance when used in conjunction with high-impact resistant fabric.
Corner Beading
Various shapes of metal and plastic exterior corner treatments, which must meet ASTM C-1063,C841,D1784-81,D-4216 and be made exclusively of galvanized metal or exterior grade plastic.

Corner Bead Adhesive - SCT Flexible Joint Compound
Fasteners
Corrosion resistant drywall screws, ring shank nails or Windlock™ type fasteners.
4 inch butyl membrane tape.

Palladium® System must be applied by Trained Applicator.

© Copyright 2006 SEALANTS & COATINGS TECHNOLOGIES, INC. All rights reserved
HOME
  
CONTACT US
  
ABOUT SCT